Yamaha Outboards
Four Stroke Motors
F4 - From $2310
-
→ 139cc single-cylinder engine.
→ Auto decompression for easy pull starting.
→ Lightweight and compact design.
→ Large, comfortable carry handles.
→ Ability to lay on one of three sides, for leak-free storage.
→ Built-in fuel tank.
→ Option of connecting to an external fuel tank.
-
Available in both short & long shafts.
Download the full specification sheet here.
F2.5 - From $1860
-
→ 72cc single-cylinder engine.
→ 360° Full pivot steering.
→ Auto decompression for easy pull starting.
→ Lightweight and compact design.
→ Large, comfortable carry handles.
→ Ability to lay on one of three sides, for leak-free storage.
→ Built-in see-through fuel tank.
-
Download the full specification sheet here.
F5 - From $2540
-
→ 139cc single-cylinder engine.
→ Auto decompression for easy pull starting.
→ Lightweight and compact design.
→ Large, comfortable carry handles.
→ Ability to lay on one of three sides, for leak-free storage.
→ Built-in fuel tank.
→ Option of connecting to an external fuel tank.
-
Available in both short & long shafts.
Download the full specification sheet here.
F6 - From $2870
-
→ 139cc single-cylinder engine.
→ Auto decompression for easy pull starting.
→ Lightweight and compact design.
→ Large, comfortable carry handles.
→ Ability to lay on one of three sides, for leak-free storage.
→ Built-in fuel tank.
→ Option of connecting to an external fuel tank.
-
Available in both short & long shafts.
Download the full specification sheet here.
F8 - From $4640
-
→ 212cc two-cylinder engine.
→ Auto decompression for easy pull starting.
→ Large, comfortable carry handles.
→ Fresh water flushing system.
→ Labyrinth exhaust system.
→ Manual Tilt shallow water drive.
→ Prime start.
→ Rest pad for horizontal storage.
-
Available in both short & long shafts.
Download the full specification sheet here.
T9.9 - From $5830
-
→ Higher gear ratio, delivering more thrust for heavier loads.
→ Dual thrust propeller delivers instant power in both forward and reverse.
→ Exclusive YDC alloy for maximum corrosion protection.
→ Freshwater flushing device for easy and quiet maintenance.
-
Available in both short & long shafts.
Download the full specification sheet here.
F9.9 - From $4970
-
→ 212cc two-cylinder engine.
→ Auto decompression for easy pull starting.
→ Large, comfortable carry handles.
→ Fresh water flushing system.
→ Labyrinth exhaust system.
→ Manual Tilt shallow water drive.
→ Prime start.
→ Rest pad for horizontal storage.
-
Available in both short & long shafts.
Download the full specification sheet here.
F15 - From $5640
-
→ 362cc two-cylinder engine.
→ Auto decompression for easy pull starting.
→ Large, comfortable carry handles.
→ Fresh water flushing system.
→ Labyrinth exhaust system.
→ Manual Tilt shallow water drive.
→ High output alternator.
→ Mechanical steering control.
-
Available in both short & long shafts.
Download the full specification sheet here.
F20 - From $6400
-
→ 362cc two-cylinder engine.
→ Auto decompression for easy pull starting.
→ Multifunctional tiller handle.
→ Variable trolling RPM switch.
→ Fresh water flushing system.
→ Labyrinth exhaust system.
→ Manual Tilt shallow water drive.
→ High output alternator.
→ Mechanical steering control.
→ Power tilt.
-
Available in both short & long shafts.
Download the full specification sheet here.
F25 - $7290
-
→ 432cc two-cylinder engine.
→ Yamaha’s first battery-less electronic fuel injection.
→ Variable trolling for low speed lure fishing.
→ Forward control or tiller options.
→ Available in electric or pull start and manual or power trim and tilt.
→ Exclusive YDC alloy for maximum corrosion protection.
→ Freshwater flushing device for easy and quiet maintenance.
→ Compatible with all of Yamaha’s premium colour and digital gauges.
-
Available in both short & long shafts.
Download the full specification sheet here.
F30 - From $9690
-
→ 747cc three-cylinder engine.
→ Variable trolling for low speed fishing.
→ Prime Start.
→ Power Trim & Tilt.
→ Freshwater flushing system.
→ Electronic Fuel Injection.
→ Long intake manifold.
→ ECM Micro-computer control.
→ Digital Network Gauges.
→ Exclusive YDC alloy for maximum corrosion protection.
-
Available in a long shaft.
Download the full specification sheet here.
F40 - From $10,795
-
→ 747cc three-cylinder engine.
→ Variable trolling for low speed fishing.
→ Prime Start.
→ Power Trim & Tilt.
→ Freshwater flushing system.
→ Electronic Fuel Injection.
→ Long intake manifold.
→ ECM Micro-computer control.
→ Digital Network Gauges.
→ Exclusive YDC alloy for maximum corrosion protection.
-
Available in short and long shaft models.
Download the full specification sheet here.
F50 - From $11,905
OR FULLY FITTED* From $13,499
-
→ 996cc four-cylinder engine.
→ Large Single Throttle Vavle
→ Forward control or optional multi-function tiller.
→ Variable trolling for low speed fishing.
→ Prime Start.
→ Power Trim & Tilt.
→ Electronic Fuel Injection.
→ High Output Alternator.
→ Labyrinth Exhaust System.
→ Exclusive YDC alloy for maximum corrosion protection.
→ Freshwater flushing device for easy and quiet maintenance.
→ Compatible with all of Yamaha’s premium colour and digital gauges.
-
Available in a long shaft model.
Download the full specification sheet here.
F60 - $13,035
-
→ 996cc four-cylinder engine.
→ Award winning engine designs with class leading power and performance.
→ Forward control or optional multi-function tiller.
→ Variable trolling for low speed fishing.
→ Exclusive YDC alloy for maximum corrosion protection.
→ Freshwater flushing device for easy and quiet maintenance.
→ Compatible with all of Yamaha’s premium colour and digital gauges.
-
Available in a long shaft model.
Download the full specification sheet here.
F70 - From $15,280
OR FULLY FITTED* From $16,499
-
→ 16-Valve 996cc four-cylinder engine.
→ New lightweight and extremely quiet design.
→ Precise Throttle Control.
→ Prime Start.
→ Electronic Fuel Injection.
→ Compatible with all of Yamaha’s premium colour and digital gauges.
→ Variable trolling control for low speed lure fishing.
→ Exclusive YDC alloy for maximum corrosion protection.
→ Freshwater flushing device for easy and quiet maintenance.
→ High output alternator to power all your electronics.
→ NMEA 2000 compatible for easy connection to other devices.
→ Power trim and tilt.
→ Available in either NEW Pearlescent White or Signature Grey.
-
Available in both long and extra long shafts.
Download the full specification sheet here.
F75 - From $17,290
-
→ 16-Valve 1832cc four-cylinder engine.
→ New lightweight and extremely quiet design.
→ Larger 81mm cylinder bore.
→ ECM Micro-computer control.
→ High output alternator to power all your electronics.
→ Offset Crankshaft.
→ Single Ram power trim and tilt.
→ Compatible with all of Yamaha’s premium colour and digital gauges.
→ Variable trolling control for low speed lure fishing.
→ Available in either NEW Pearlescent White or Signature Grey.
-
Download the full specification sheet here.
F90 - From $19,350
-
→ 16-Valve 1832cc four-cylinder engine.
→ New lightweight and extremely quiet design.
→ Compatible with all of Yamaha’s premium colour and digital gauges.
→ Variable trolling control for low speed lure fishing.
→ Exclusive YDC alloy for maximum corrosion protection.
→ Freshwater flushing device for easy and quiet maintenance.
→ Compatible with Yamaha’s SDS range of Shift Dampening propellers.
→ ECM Micro-computer control for maximum efficiency.
→ High output alternator to power all your electronics.
→ NMEA 2000 compatible for easy connection to other devices.
→ Single ram power trim and tilt unit.
→ Available in either NEW Pearlescent White or Signature Grey.
-
Download the full specification sheet here.
F115 - From $21,460
OR FULLY FITTED* From $20,999
-
→ 16-Valve 1832cc four-cylinder engine.
→ New lightweight and extremely quiet design.
→ Compatible with all of Yamaha’s premium colour and digital gauges.
→ Variable trolling control for low speed lure fishing.
→ Exclusive YDC alloy for maximum corrosion protection.
→ Freshwater flushing device for easy and quiet maintenance.
→ Compatible with Yamaha’s SDS range of Shift Dampening propellers.
→ ECM Micro-computer control for maximum efficiency.
→ High output alternator to power all your electronics.
→ NMEA 2000 compatible for easy connection to other devices.
→ Single ram power trim and tilt unit.
→ Available in either NEW Pearlescent White or Signature Grey.
-
Download the full specification sheet here.
F130 - From $23,700
-
→ 16-Valve 1832cc four-cylinder engine.
→ Lightweight and extremely quiet design.
→ Electronic throttle valve for incredible response, power and economy.
→ Compatible with all of Yamaha’s premium colour and digital gauges.
→ Variable trolling control for low speed lure fishing.
→ Exclusive YDC alloy for maximum corrosion protection.
→ Freshwater flushing device for easy and quiet maintenance.
→ Compatible with Yamaha’s SDS range of Shift Dampening propellers.
→ ECM Micro-computer control for maximum efficiency.
→ High output alternator to power all your electronics.
→ NMEA 2000 compatible for easy connection to other devices.
→ Single ram power trim and tilt unit.
-
Download the full specification sheet here.
F150 - From $28,015
OR FULLY FITTED* From $27,999
-
→ 2785cc (Digital Control) or 2670cc (Mechanical Control) engine options.
→ Four-cylinder In-line design delivers excellent fuel efficiency.
→ Integrated Electro-Hydraulic or Integrated Hydraulic Steering options.
→ Built-In tilt limiter.
→ 2 colour options with raised graphics.
-
Download the full specification sheet here.
F175 - From $29,875
-
→ 2.8L Four-Cylinder Engine.
→ Four-cylinder In-line design delivers excellent fuel efficiency.
→ Electronic Throttle Valve.
→ New Look Cowling.
→ Direct Ignition.
→ High-output Alternator.
→ Offset Crankshaft.
→ Shift-Dampening System.
→ Variable Trolling Control.
→ Integrated Electro-Hydraulic or Integrated Hydraulic Steering options.
→ Built-In tilt limiter.
→ 2 colour options with raised graphics.
-
Download the full specification sheet here.
F200 - From $32,545
-
→ 2.8L Four-Cylinder Engine.
→ Four-cylinder In-line design delivers excellent fuel efficiency.
→ Electronic Throttle Valve.
→ New Look Cowling.
→ Direct Ignition.
→ High-output Alternator.
→ Variable Camshaft Timing.
→ Offset Crankshaft.
→ Shift-Dampening System.
→ Variable Trolling Control.
→ Integrated Electro-Hydraulic or Integrated Hydraulic Steering options.
→ Built-In tilt limiter.
→ 2 colour options with raised graphics.
-
Download the full specification sheet here.
F225 - From $39,090
-
→ 2785cc (Digital Control) or 2670cc (Mechanical Control) engine options.
→ Four-cylinder In-line design delivers excellent fuel efficiency.
→ Integrated Electro-Hydraulic or Integrated Hydraulic Steering options.
→ Built-In tilt limiter.
→ 2 colour options with raised graphics.
-
Download the full specification sheet here.
F250 - From $42,360
-
→ 4200cc V6 Engine.
→ Digital Electronic Throttle.
→ Plasma Fused Cylinders.
→ Compact In-bank Exhaust System.
→ Variable Camshaft Timing.
→ New Look Cowling.
→ Enhanced Lower Unit.
→ High-output Alternator.
→ Variable Trolling Control.
→ Integrated Electro-Hydraulic or Integrated Hydraulic Steering options.
→ 2 colour options with raised graphics.
-
Download the full specification sheet here.
* Fully Fitted T&C’s : Offer pricing includes 703 remote control, 6Y8 gauges, propeller, control cables, and boat fitting. Price excludes removal of previous outboard and controls, repairs to electrical systems, fuel system/dash repairs, or steering systems, and transom repairs. Not available in conjunction with any other offer.Two Stroke Motors
2HP - $929 ON SALE From $899
-
→ 50cc Single-Cylinder
→ 100 to 1 Fuel Oil Ratio
→ Anti Corrosion
→ Ergonomic Carry Points
→ Loop Charging
→ Maintenance Free CDI Ignition
→ Self-Sacrificing Anodes
→ Shallow Water Drive
-
Engine Type: 2-Stroke, In-line 1
Bore x Stroke (mm): 42 x 36
Fuel Tank Capacity (l): 1.2
Displacement (cc): 50.0
Recommended Maximum RPM 4000-5000
Fuel Management: Carb
Ignition: CDI
Lubrication System: Pre-mixing
Gear Ratio 2.08 : 1
Starter System: Manual
Operation Method: Tiller handle
Trim and Tilt Method: Manual tilt
3HP - From $1329
-
→ 70cc Single-Cylinder
→ 100 to 1 Fuel Oil Ratio
→ Anti Corrosion
→ Ergonomic Carry Points
→ Loop Charging
→ Maintenance Free CDI Ignition
→ Self-Sacrificing Anodes
→ Shallow Water Drive
-
Engine Type: 2-Stroke, In-line 1
Bore x Stroke (mm): 46 x 42
Fuel Tank Capacity (l): 1.4
Displacement (cc): 70.0
Recommended Maximum RPM 4500-5500
Fuel Management: Carb
Ignition: CDI
Lubrication System: Pre-mixing
Gear Ratio 2.08 : 1
Starter System: Manual
Operation Method: Tiller handle
Trim and Tilt Method: Manual tilt
4HP - From $2360
-
→ 103cc Single-Cylinder
→ Anti Corrosion
→ Ergonomic Carry Points
→ Loop Charging
→ Maintenance Free CDI Ignition
→ Self-Sacrificing Anodes
→ Shallow Water Drive
→ 2-Way Fuel Supply with Internal Tank
→ Available in both short & long shaft models
-
Engine Type 2-Stroke, In-line 1
Bore x Stroke (mm): 54 x 45
Fuel Tank Capacity (l): 2.8
Displacement (cc): 103.0
Recommended Maximum RPM 4500-5500
Fuel Management: Carb
Ignition: CDI
Lubrication System: Pre-mixing
Alternator Output: Optional with Rectifier
Gear Ratio: 2.08 : 1
Starter System: Manual
Operation Method: Tiller handle
Trim and Tilt Method: Manual tilt
15HP - From $3900
-
→2-Cylinder 2-Stroke
→ 100 to 1 Fuel Oil Ratio
→ Anti Corrosion
→ Ergonomic Carry Points
→ Loop Charging
→ Maintenance Free CDI Ignition
→ Self-Sacrificing Anodes
→ Shallow Water Drive
-
Engine Type: 2-Stroke, In-line 2
Bore x Stroke (mm): 56 x 50
Fuel Tank Capacity (l): 24.0
Displacement (cc): 246.0
Recommended Maximum RPM: 4500-5500
Fuel Management: Carb
Ignition: CDI
Lubrication System: Pre-mixing
Alternator Output: Optional with rectifier
Gear Ratio: 2.08 : 1
Starter System: Manual
Operation Method: Tiller handle
Trim and Tilt Method: Manual tilt
25HP - From $5040
-
→ 496cc Two-Cylinder
→ 100 to 1 Fuel Oil Ratio
→ 3 Year Warranty
→ Anti Corrosion
→ Loop Charging
→ Maintenance Free CDI Ignition
→ Self-Sacrificing Anodes
→ Shallow Water Drive
-
Engine Type: 2-Stroke, In-line 2
Bore x Stroke (mm): 72 x 61
Fuel Tank Capacity (l): 24.0
Displacement (cc): 496.0
Recommended Maximum RPM: 4500-5500
Fuel Management: Carb
Ignition: CDI
Lubrication System: Pre-mixing
Alternator Output: Optional with rectifier
Gear Ratio: 2.08 : 1
Starter System: Manual
Operation Method: Tiller handle
Trim and Tilt Method: Manual tilt
30HP - From $5500
-
→ 103cc Single-Cylinder
→ Anti Corrosion
→ Ergonomic Carry Points
→ Loop Charging
→ Maintenance Free CDI Ignition
→ Self-Sacrificing Anodes
→ Shallow Water Drive
→ 2-Way Fuel Supply with Internal Tank
→ Available in both short & long shaft models
-
Engine Type: 2-Stroke, In-line 2
Bore x Stroke (mm): 59.5 x 59.5
Fuel Tank Capacity (l): 24.0
Displacement (cc): 496.0
Recommended Maximum RPM: 5000-5500
Fuel Management: Carb
Ignition: CDI
Lubrication System: Pre-mixing
Alternator Output: 12V - 6A with rectifier (W, WH) Optional with Rectifier (MH)
Gear Ratio: 2.08 : 1
Starter System: Manual (MH), Manual & Electric (W, WH)
Operation Method: Remote control (W), Tiller handle (MH)
Trim and Tilt Method: Manual tilt
40HP - From $9215
-
→ 698cc Three-Cylinder
→ 100 to 1 Fuel Oil Ratio
→ 3 Year Warranty
→ Anti Corrosion
→ Loop Charging
→ Maintenance Free CDI Ignition
→ Power Trim & Tilt
→ Precision Blend Oil Injection
→ Self-Sacrificing Anodes
→ Shallow Water Drive
-
Engine Type: 2-Stroke, In-line 3
Bore x Stroke (mm): 67 x 66
Fuel Tank Capacity (l): 24.0
Displacement (cc): 698.0
Recommended Maximum RPM: 4500-5500
Fuel Management: Carb
Ignition: CDI
Lubrication System: Oil Injection (ETO, WHTO), Pre-mixing (MHD)
Alternator Output: 12V - 6A with rectifier regulator (ETO, WHTO)
Gear Ratio: 1.85 : 1
Starter System: Electric (ETO), Manual (MHD), Manual & electric (WHTO)
Operation Method: Remote control (ETO), Tiller handle (WHTO, MHD)
Trim and Tilt Method: Power trim & tilt (ETO, WHTO), Hydro tilt (MHD)
Digital Gauges: Optional
50HP - From $9325
-
→ 698cc Three-Cylinder
→ 3 Year Warranty
→ Anti Corrosion
→ Loop Charging
→ Maintenance Free CDI Ignition
→ Power Trim & Tilt
→ Precision Blend Oil Injection
→ Self-Sacrificing Anodes
→ Shallow Water Drive
-
Engine Type: 2-Stroke, In-line 3
Bore x Stroke (mm): 67 x 66
Fuel Tank Capacity (l): 24.0
Displacement (cc): 698.0
Recommended Maximum RPM: 4500-5500
Fuel Management: Carb
Ignition: CDI
Lubrication System: Oil Injection (ETO, WHTO), Pre-mixing (MHD)
Alternator Output: 12V - 6A with rectifier regulator (ETO, WHTO)
Gear Ratio: 1.85 : 1
Starter System: Electric (ETO), Manual (MHD), Manual & electric (WHTO)
Operation Method: Remote control (ETO), Tiller handle (WHTO, MHD)
Trim and Tilt Method: Power trim & tilt (ETO, WHTO), Hydro tilt (MHD)
Digital Gauges: Optional